Description
High quality granulated consumable, based on a titanium alloy, specially designed for use in cold fire machines as indoor pyrotechnics and to generate special fire and spark effects at events and shows. It is completely harmless, does not burn, does not require any license, and is not a pyrotechnic composition. The Cold Spark Powder consumable is compatible with all types of cold fire machines, such as the MOTH Spark Machine and Sparkular spark machine. It is available in various references depending on the height of the spark source: MEDIUM: 3-5 m and LARGE 4-6 m. It is sold in a 200g sealed bag for perfect storage and preservation.
WHAT IS A COLD FIRE MACHINE
The real spark or cold fire machines are not pyrotechnics, so they can be used in closed spaces or places close to people, as they are not dangerous, do not burn and do not produce smoke. You do not need a pyrotechnics license or authorization, so you can use this type of products in any space. This spark effect is controlled through DMX protocol, by means of a lighting table, through a control case that has pre-recorded sequences. The cold fire machines work with the Cold Spark Powder consumable that allows the spark jet to be generated. Its consumption is approximately 200 g of granules for every 10 minutes at maximum power or about 15 minutes at minimum power. It works with DMX and direct control. It allows the output and height of the sparks to be regulated between 1.5m and 5m depending on the value assigned in the machine itself, on the DMX table or in the control case. It is very useful to adapt it to different spaces and numbers of people. It works with temperatures ranging from -10 °C to 50 °C, despite this it is a device without fire risks as it does not use any type of pyrotechnics to achieve the effect.
HOW IT WORKS
This visual effect is achieved by heating our Cold Spark Powder granulated alloy to working temperature, which is spread on the top of the equipment in a specially prepared space. When the appropriate temperature is reached, the spark fountain is triggered by means of a control. The height reached by the fountain and the number of sparks can be regulated with the same control on the equipment, with this you can even prolong the duration of the effect, or make it visible from a greater distance. The unit is controlled by DMX, which gives it versatility by allowing it to be combined with other effects.
WHERE CAN IT BE USED
The cold fire machine is perfect for use in closed spaces, it does not generate burns or strange smells during use. Cold Spark Powder can be used near people without any risk, it does not produce toxic waste, so it will not even contaminate food or drinks. It can also be used without problems on platforms, where you can perform effects with several of these machines, or combine them with sound and lights, you just have to make sure that they can all be controlled via DMX. The only precaution during installation is that in outdoor spaces there cannot be moisture, since, if it enters the unit, it can be damaged. By eliminating the pyrotechnic part within its specifications, a wide range of opportunities opens up for us. In addition, and as mentioned in the previous section, its controller will allow us to create our own effects, controlling the height of the spark streams, if we activate them all at once or in staggered sequences, if we keep some off while others work. The only limit will be your imagination: weddings, entertainment venues, night events (it is important that there is little light so that the result is even more prominent), concerts, festivals…
